www.www.buonovino.com

[abhyankar]

To, SEF (Structural Engineering Forum) members
CC - All Structural / Civil engineers, HCC (Design Dept.)

Dear All,
Sorry !! This is not in connection with the E-Conference that is currently
going on, but little deviation from the main subject.
Till now we had many discussions on various topics of engineering. Now can
we not prepare a 'Structural Engineering Handbook'. It may have following
topics

***********************************************************************
*** Volume - I
* General Engineering
Chapter 1. History of Structural engineering
Development of Structural Engineering
Middle period
Current scenario
Vision Ahead
Chapter 2. Fields in Structural engineering
Chapter 3. Case studies
Chapter 4. Summary & References

*** Volume - II
* Basic Theories Of Structural Mechanics
Chapter 1. Stable Structures
Chapter 2. Analysis of stable Determinate and Indeterminate structures
Chapter 3. Deflection theories
Chapter 4. Introduction to Particulate Mechanics (Soil Mechanics) & Fluid
Mechanics
Chapter 5. Plastic theory
Chapter 6. Matrix Methods
Chapter 5. Summary of Charts, Tables & Formulae

*** Volume - III
* Advanced Theories & methods in analysis
Chapter 1. Structural Dynamics - Linear & Nonlinear
Chapter 2. FEM
Chapter 3. Stability Theories
Chapter 4. Analysis of plates & shells - Static & Dynamic Loads
Chapter 5. Mathematics in structures
Chapter 6. Summary of Formulae / charts / tables

*** Volume - IV
Engineering Material & their testing methods
Chapter 1. Concrete Technology - Basic & Advanced
Chapter 2. Steel & Plastics
Chapter 3. Composite materials
Chapter 4. Wood
Chapter 5. Other material
Chapter 6. Advances in Engineering Materials, polymers, epoxy (specialized
topics related with chemical engg.)
Chapter 8. Experimental Stress analysis
Chapter 7. Destructive testing & NDT

*** Volume - V
Design of Structures - Applied Engineering
Chapter 1. Fundamentals of Elastic theory (Working stress Design);
Plastic theory (Ultimate strength design) & Probability
theory (Limit state method)
Chapter 2. Basic Design philosophy for Reinforced Concrete Members
Chapter 3. Basic Design philosophy for Steel Members
Chapter 4. Basic Design philosophy for Timber Members
Chapter 5. Basic Design philosophy for Unreinforced & Reinforced Masonry
Members
Chapter 6. Summary of design charts / formulae & tables
Chapter 7. Prestressed Concrete

*** Volume - VI
Bridge Engineering

*** Volume - VII
模板的结构

* * *体积-八世
Standards & Guidelines for Design & Construction of Structures
Chapter 1. Subject wise classification & listing of codes
Chapter 2. Indian code, IRC
Chapter 3. British Code
Chapter 4. American Code
Chapter 5. Other codes
Chapter 6. Summary of design charts / formulae & tables

*** Volume - IX
Earthquake Engineering and It's Applications
Chapter 1. Fundamentals
Chapter 2. Effect of Earthquake in buildings
Chapter 3. Effect of Earthquake in bridges
Chapter 4. Aseismic design
Chapter 5. Retrofitting / Rehab / Repairing

*** Volume - X
Analysis of Buildings
Chapter 1. Theories used for analysis of buildings
Chapter 2. Bare frame, braced frame & infilled frame analysis
Chapter 3. Analysis of super structure & substructure (footing/piling)
Chapter 4. Multistoreyed buildings
Chapter 5. Use of computers in analysis & design

*** Volume - XI
Comparative study of various computer software & programs
Chapter 1. Developing software using computers
Chapter 1. STAAD-Pro
Chapter 2. SAP
Chapter 3. Etabs
Chapter 4. Ansys
Chapter 5. Algor
Chapter 6. Other programs
Chapter 7. Use of 'Excel' & 'MathCAD' in analysis

*** Volume - XII
Legal aspects & schedule of fees for Consultants
Ethics of the profession
Chapter 1. Laws & rules / binding on professionals
Chapter 2. Methods of charging fees.
Chapter 3. Laws in other countries.

*** Volume - XIII (Will have to be kept under revision every year)
List of professional
Chapter 1. List of Consultants (sorted as per their capability / capacity /
specialty)
Chapter 2. List of Contractors ( -- do --)
Chapter 3. List of material suppliers
Chapter 3. List of Major Clients
Chapter 4. List of Web sites
Chapter 5. Summary of other sources / services

****************************************************************************
*******************
Your suggestions and comments are most welcome to correct the above list /
物品标识。但是它将be more happier moment for all of us if this
task comes in reality. But for this we all engineers have to come together.


Thanks & Regards
Vivek Abhyankar







--------------------------------------------------------------
Hindustan Construction Company, Mumbai, India

Posted via Email

[mutyalanaidu at rediff...]

excellent idea to have a unique book which contains all the
topics
mentioned by vivekji




On Wed, 23 Jul 2003ABHYANKAR@hccindia.co.inwrote :

[mutyalanaidu at rediff...]

excellent idea to have a unique book which contains all the
topics
mentioned by vivekji




On Wed, 23 Jul 2003ABHYANKAR@hccindia.co.inwrote :

[SKSNL at ltecd.ltindia...]

Listing of contents is well done! I have a suggestion. One volume of the
handbook should be dedicated to "Industrial Structures". This may
include silo / bunker, pipe rack, equipment foundation, gas ducts,
material handling structures and many more. I find scarcity of good
books in this field of knowledge (especially conforming to Indian
codes), while there are lot intricacies involved in such design.

Regards.

Subhamoy Kar

~~~~~~~~~~~~~~~~~~
Original Message:

From:ABHYANKAR@hccindia.co.in
Subject: Structural Engineering Manual
Date: 23/07/03
Time: 17:40:38

To, SEF (Structural Engineering Forum) members
CC - All Structural / Civil engineers, HCC (Design Dept.)

Dear All,
Sorry !! This is not in connection with the E-Conference that is
currently
going on, but little deviation from the main subject.
Till now we had many discussions on various topics of engineering. Now
can
we not prepare a 'Structural Engineering Handbook'. It may have
following
topics

***********************************************************************
*** Volume - I
* General Engineering
Chapter 1. History of Structural engineering
Development of Structural Engineering
Middle period
Current scenario
Vision Ahead
Chapter 2. Fields in Structural engineering
Chapter 3. Case studies
Chapter 4. Summary & References

*** Volume - II
* Basic Theories Of Structural Mechanics
Chapter 1. Stable Structures
Chapter 2. Analysis of stable Determinate and Indeterminate structures
Chapter 3. Deflection theories
Chapter 4. Introduction to Particulate Mechanics (Soil Mechanics) &
Fluid
Mechanics
Chapter 5. Plastic theory
Chapter 6. Matrix Methods
Chapter 5. Summary of Charts, Tables & Formulae

*** Volume - III
* Advanced Theories & methods in analysis
Chapter 1. Structural Dynamics - Linear & Nonlinear
Chapter 2. FEM
Chapter 3. Stability Theories
Chapter 4. Analysis of plates & shells - Static & Dynamic Loads
Chapter 5. Mathematics in structures
Chapter 6. Summary of Formulae / charts / tables

*** Volume - IV
Engineering Material & their testing methods
Chapter 1. Concrete Technology - Basic & Advanced
Chapter 2. Steel & Plastics
Chapter 3. Composite materials
Chapter 4. Wood
Chapter 5. Other material
Chapter 6. Advances in Engineering Materials, polymers, epoxy
(specialized
topics related with chemical engg.)
Chapter 8. Experimental Stress analysis
Chapter 7. Destructive testing & NDT

*** Volume - V
Design of Structures - Applied Engineering
Chapter 1. Fundamentals of Elastic theory (Working stress Design);
Plastic theory (Ultimate strength design) &
Probability
theory (Limit state method)
Chapter 2. Basic Design philosophy for Reinforced Concrete Members
Chapter 3. Basic Design philosophy for Steel Members
Chapter 4. Basic Design philosophy for Timber Members
Chapter 5. Basic Design philosophy for Unreinforced & Reinforced
Masonry
Members
Chapter 6. Summary of design charts / formulae & tables
Chapter 7. Prestressed Concrete

*** Volume - VI
Bridge Engineering

*** Volume - VII
模板的结构

* * *体积-八世
Standards & Guidelines for Design & Construction of Structures
Chapter 1. Subject wise classification & listing of codes
Chapter 2. Indian code, IRC
Chapter 3. British Code
Chapter 4. American Code
Chapter 5. Other codes
Chapter 6. Summary of design charts / formulae & tables

*** Volume - IX
Earthquake Engineering and It's Applications
Chapter 1. Fundamentals
Chapter 2. Effect of Earthquake in buildings
Chapter 3. Effect of Earthquake in bridges
Chapter 4. Aseismic design
Chapter 5. Retrofitting / Rehab / Repairing

*** Volume - X
Analysis of Buildings
Chapter 1. Theories used for analysis of buildings
Chapter 2. Bare frame, braced frame & infilled frame analysis
Chapter 3. Analysis of super structure & substructure (footing/piling)

Chapter 4. Multistoreyed buildings
Chapter 5. Use of computers in analysis & design

*** Volume - XI
Comparative study of various computer software & programs
Chapter 1. Developing software using computers
Chapter 1. STAAD-Pro
Chapter 2. SAP
Chapter 3. Etabs
Chapter 4. Ansys
Chapter 5. Algor
Chapter 6. Other programs
Chapter 7. Use of 'Excel' & 'MathCAD' in analysis

*** Volume - XII
Legal aspects & schedule of fees for Consultants
Ethics of the profession
Chapter 1. Laws & rules / binding on professionals
Chapter 2. Methods of charging fees.
Chapter 3. Laws in other countries.

*** Volume - XIII (Will have to be kept under revision every year)
List of professional
Chapter 1. List of Consultants (sorted as per their capability /
capacity /
specialty)
Chapter 2. List of Contractors ( -- do --)
Chapter 3. List of material suppliers
Chapter 3. List of Major Clients
Chapter 4. List of Web sites
Chapter 5. Summary of other sources / services

****************************************************************************
*******************
Your suggestions and comments are most welcome to correct the above
list /
物品标识。但是它将be more happier moment for all of us if
this
task comes in reality. But for this we all engineers have to come
together.


Thanks & Regards
Vivek Abhyankar







--------------------------------------------------------------
Hindustan Construction Company, Mumbai, India








----------------------------------------------------------

Posted via Email

[SKSNL at ltecd.ltindia...]

Listing of contents is well done! I have a suggestion. One volume of the
handbook should be dedicated to "Industrial Structures". This may
include silo / bunker, pipe rack, equipment foundation, gas ducts,
material handling structures and many more. I find scarcity of good
books in this field of knowledge (especially conforming to Indian
codes), while there are lot intricacies involved in such design.

Regards.

Subhamoy Kar

~~~~~~~~~~~~~~~~~~
Original Message:

From:ABHYANKAR@hccindia.co.in
Subject: Structural Engineering Manual
Date: 23/07/03
Time: 17:40:38

To, SEF (Structural Engineering Forum) members
CC - All Structural / Civil engineers, HCC (Design Dept.)

Dear All,
Sorry !! This is not in connection with the E-Conference that is
currently
going on, but little deviation from the main subject.
Till now we had many discussions on various topics of engineering. Now
can
we not prepare a 'Structural Engineering Handbook'. It may have
following
topics

***********************************************************************
*** Volume - I
* General Engineering
Chapter 1. History of Structural engineering
Development of Structural Engineering
Middle period
Current scenario
Vision Ahead
Chapter 2. Fields in Structural engineering
Chapter 3. Case studies
Chapter 4. Summary & References

*** Volume - II
* Basic Theories Of Structural Mechanics
Chapter 1. Stable Structures
Chapter 2. Analysis of stable Determinate and Indeterminate structures
Chapter 3. Deflection theories
Chapter 4. Introduction to Particulate Mechanics (Soil Mechanics) &
Fluid
Mechanics
Chapter 5. Plastic theory
Chapter 6. Matrix Methods
Chapter 5. Summary of Charts, Tables & Formulae

*** Volume - III
* Advanced Theories & methods in analysis
Chapter 1. Structural Dynamics - Linear & Nonlinear
Chapter 2. FEM
Chapter 3. Stability Theories
Chapter 4. Analysis of plates & shells - Static & Dynamic Loads
Chapter 5. Mathematics in structures
Chapter 6. Summary of Formulae / charts / tables

*** Volume - IV
Engineering Material & their testing methods
Chapter 1. Concrete Technology - Basic & Advanced
Chapter 2. Steel & Plastics
Chapter 3. Composite materials
Chapter 4. Wood
Chapter 5. Other material
Chapter 6. Advances in Engineering Materials, polymers, epoxy
(specialized
topics related with chemical engg.)
Chapter 8. Experimental Stress analysis
Chapter 7. Destructive testing & NDT

*** Volume - V
Design of Structures - Applied Engineering
Chapter 1. Fundamentals of Elastic theory (Working stress Design);
Plastic theory (Ultimate strength design) &
Probability
theory (Limit state method)
Chapter 2. Basic Design philosophy for Reinforced Concrete Members
Chapter 3. Basic Design philosophy for Steel Members
Chapter 4. Basic Design philosophy for Timber Members
Chapter 5. Basic Design philosophy for Unreinforced & Reinforced
Masonry
Members
Chapter 6. Summary of design charts / formulae & tables
Chapter 7. Prestressed Concrete

*** Volume - VI
Bridge Engineering

*** Volume - VII
模板的结构

* * *体积-八世
Standards & Guidelines for Design & Construction of Structures
Chapter 1. Subject wise classification & listing of codes
Chapter 2. Indian code, IRC
Chapter 3. British Code
Chapter 4. American Code
Chapter 5. Other codes
Chapter 6. Summary of design charts / formulae & tables

*** Volume - IX
Earthquake Engineering and It's Applications
Chapter 1. Fundamentals
Chapter 2. Effect of Earthquake in buildings
Chapter 3. Effect of Earthquake in bridges
Chapter 4. Aseismic design
Chapter 5. Retrofitting / Rehab / Repairing

*** Volume - X
Analysis of Buildings
Chapter 1. Theories used for analysis of buildings
Chapter 2. Bare frame, braced frame & infilled frame analysis
Chapter 3. Analysis of super structure & substructure (footing/piling)

Chapter 4. Multistoreyed buildings
Chapter 5. Use of computers in analysis & design

*** Volume - XI
Comparative study of various computer software & programs
Chapter 1. Developing software using computers
Chapter 1. STAAD-Pro
Chapter 2. SAP
Chapter 3. Etabs
Chapter 4. Ansys
Chapter 5. Algor
Chapter 6. Other programs
Chapter 7. Use of 'Excel' & 'MathCAD' in analysis

*** Volume - XII
Legal aspects & schedule of fees for Consultants
Ethics of the profession
Chapter 1. Laws & rules / binding on professionals
Chapter 2. Methods of charging fees.
Chapter 3. Laws in other countries.

*** Volume - XIII (Will have to be kept under revision every year)
List of professional
Chapter 1. List of Consultants (sorted as per their capability /
capacity /
specialty)
Chapter 2. List of Contractors ( -- do --)
Chapter 3. List of material suppliers
Chapter 3. List of Major Clients
Chapter 4. List of Web sites
Chapter 5. Summary of other sources / services

****************************************************************************
*******************
Your suggestions and comments are most welcome to correct the above
list /
物品标识。但是它将be more happier moment for all of us if
this
task comes in reality. But for this we all engineers have to come
together.


Thanks & Regards
Vivek Abhyankar







--------------------------------------------------------------
Hindustan Construction Company, Mumbai, India








----------------------------------------------------------

Posted via Email

[abhyankar]

Yes, agreed!!
We need to first receive all such suggestions, to crystallize the contents,
and incorporate all the possible critical areas of STRUCTURES ENGINEERING.

Dear All,

This kind of 'Concept of Structural Engineering Handbook' can not proceed as
'ONE MAN SHOW'. Efforts / contribution from all the professionals is
required for success.

Regards
Vivek


-----Original Message-----
From:SKSNL@ltecd.ltindia.com[mailto:SKSNL@ltecd.ltindia.com]
Sent: Friday, July 25, 2003 2:53 PM
To:ABHYANKAR@hccindia.co.in
Subject: Structural Engineering Manual


Listing of contents is well done! I have a suggestion. One volume of the
handbook should be dedicated to "Industrial Structures". This may
include silo / bunker, pipe rack, equipment foundation, gas ducts,
material handling structures and many more. I find scarcity of good
books in this field of knowledge (especially conforming to Indian
codes), while there are lot intricacies involved in such design.

Regards.

Subhamoy Kar

~~~~~~~~~~~~~~~~~~
Original Message:

From:ABHYANKAR@hccindia.co.in
Subject: Structural Engineering Manual
Date: 23/07/03
Time: 17:40:38

To, SEF (Structural Engineering Forum) members
CC - All Structural / Civil engineers, HCC (Design Dept.)

Dear All,
Sorry !! This is not in connection with the E-Conference that is
currently
going on, but little deviation from the main subject.
Till now we had many discussions on various topics of engineering. Now
can
we not prepare a 'Structural Engineering Handbook'. It may have
following
topics

***********************************************************************
*** Volume - I
* General Engineering
Chapter 1. History of Structural engineering
Development of Structural Engineering
Middle period
Current scenario
Vision Ahead
Chapter 2. Fields in Structural engineering
Chapter 3. Case studies
Chapter 4. Summary & References

*** Volume - II
* Basic Theories Of Structural Mechanics
Chapter 1. Stable Structures
Chapter 2. Analysis of stable Determinate and Indeterminate structures
Chapter 3. Deflection theories
Chapter 4. Introduction to Particulate Mechanics (Soil Mechanics) &
Fluid
Mechanics
Chapter 5. Plastic theory
Chapter 6. Matrix Methods
Chapter 5. Summary of Charts, Tables & Formulae

*** Volume - III
* Advanced Theories & methods in analysis
Chapter 1. Structural Dynamics - Linear & Nonlinear
Chapter 2. FEM
Chapter 3. Stability Theories
Chapter 4. Analysis of plates & shells - Static & Dynamic Loads
Chapter 5. Mathematics in structures
Chapter 6. Summary of Formulae / charts / tables

*** Volume - IV
Engineering Material & their testing methods
Chapter 1. Concrete Technology - Basic & Advanced
Chapter 2. Steel & Plastics
Chapter 3. Composite materials
Chapter 4. Wood
Chapter 5. Other material
Chapter 6. Advances in Engineering Materials, polymers, epoxy
(specialized
topics related with chemical engg.)
Chapter 8. Experimental Stress analysis
Chapter 7. Destructive testing & NDT

*** Volume - V
Design of Structures - Applied Engineering
Chapter 1. Fundamentals of Elastic theory (Working stress Design);
Plastic theory (Ultimate strength design) &
Probability
theory (Limit state method)
Chapter 2. Basic Design philosophy for Reinforced Concrete Members
Chapter 3. Basic Design philosophy for Steel Members
Chapter 4. Basic Design philosophy for Timber Members
Chapter 5. Basic Design philosophy for Unreinforced & Reinforced
Masonry
Members
Chapter 6. Summary of design charts / formulae & tables
Chapter 7. Prestressed Concrete

*** Volume - VI
Bridge Engineering

*** Volume - VII
模板的结构

* * *体积-八世
Standards & Guidelines for Design & Construction of Structures
Chapter 1. Subject wise classification & listing of codes
Chapter 2. Indian code, IRC
Chapter 3. British Code
Chapter 4. American Code
Chapter 5. Other codes
Chapter 6. Summary of design charts / formulae & tables

*** Volume - IX
Earthquake Engineering and It's Applications
Chapter 1. Fundamentals
Chapter 2. Effect of Earthquake in buildings
Chapter 3. Effect of Earthquake in bridges
Chapter 4. Aseismic design
Chapter 5. Retrofitting / Rehab / Repairing

*** Volume - X
Analysis of Buildings
Chapter 1. Theories used for analysis of buildings
Chapter 2. Bare frame, braced frame & infilled frame analysis
Chapter 3. Analysis of super structure & substructure (footing/piling)

Chapter 4. Multistoreyed buildings
Chapter 5. Use of computers in analysis & design

*** Volume - XI
Comparative study of various computer software & programs
Chapter 1. Developing software using computers
Chapter 1. STAAD-Pro
Chapter 2. SAP
Chapter 3. Etabs
Chapter 4. Ansys
Chapter 5. Algor
Chapter 6. Other programs
Chapter 7. Use of 'Excel' & 'MathCAD' in analysis

*** Volume - XII
Legal aspects & schedule of fees for Consultants
Ethics of the profession
Chapter 1. Laws & rules / binding on professionals
Chapter 2. Methods of charging fees.
Chapter 3. Laws in other countries.

*** Volume - XIII (Will have to be kept under revision every year)
List of professional
Chapter 1. List of Consultants (sorted as per their capability /
capacity /
specialty)
Chapter 2. List of Contractors ( -- do --)
Chapter 3. List of material suppliers
Chapter 3. List of Major Clients
Chapter 4. List of Web sites
Chapter 5. Summary of other sources / services

****************************************************************************
*******************
Your suggestions and comments are most welcome to correct the above
list /
物品标识。但是它将be more happier moment for all of us if
this
task comes in reality. But for this we all engineers have to come
together.


Thanks & Regards
Vivek Abhyankar







--------------------------------------------------------------
Hindustan Construction Company, Mumbai, India








----------------------------------------------------------




















--------------------------------------------------------------
Hindustan Construction Company, Mumbai, India

Posted via Email